Honda HSM1336i, Owner'S Manual

Page: 127 / 144

125
TAKING CARE OF UNEXPECTED PROBLEMS
(3)Does not clear snow well.
SYMPTOM POSSIBLE CAUSE REMEDY
Hard to drive the
snow blower in the
forward direction while
clearing the snow. Auger shear bolt is broken. Replace the auger shear bolt (see
page 91).
Auger housing height is not
adjusted properly. Adjust the auger housing height
in the proper position (see page
50).
Snow is stuck in the auger and
the related parts of the
snow blower. Remove the snow from the
underside of the auger housing
(see page 71).
Snow does not come out
from the snow discharge
chute. Snow discharge chute is
clogged. Use the snow clearing bar and
remove the snow from the snow
discharge chute (see page 71).
Hard to collect the snow
to clear. Snow is stuck on the auger. Remove the snow from the
auger and the related parts (see
page 71).
Blower does not rotate. Blower shear bolt is broken. Replace the blower shear bolt
(see page 91).
Drive motor overheated by
operation under excessive load,
which armed the protection
function. Release the drive clutch lever
and stop the work. Keep the
engine switch in the ON position
and wait until the drive control
warning indicator (orange) does
not blink (see page 65).
Auger clutch switch or
electromagnetic clutch is faulty. Consult an authorized Honda
dealer.
Auger does not rotate. Auger shear bolt is broken. Replace the auger shear bolt (see
page 91).
Drive motor overheated by
operation under excessive load,
which armed the protection
function. Release the drive clutch lever
and stop the work. Keep the
engine switch in the ON position
and wait until the drive control
warning indicator (orange) does
not blink (see page 65).
Auger clutch switch or
electromagnetic clutch is faulty. Consult an authorized Honda
dealer.
31V15621.book 125 ページ ２０１８年１０月１０日 水曜日 午前１１時４分