112
TRANSPORTING
BEFORE LOADING
1. Loading the snow blower on a truck or trailer should be performed
on a firm, level surface.
2. Use a loading ramp that is strong enough to support the combined
weight of the snow blower and the operator:
Weight of snow blower: (Operating weight)
USA model: 573 lbs (260 kg)
Canadian model: 250 kg (551 lbs)
3. The loading ramp must be long enough
so that its slope is 15° (26%) or less.
Recommended ramp lengths are shown
in the following table:
4. If the truck bed has a low roof or cover, with less than 5 ft (1.5 m) of
headroom, lower the discharge deflector for better clearance, or
remove the chute assembly.
5. Check that there is sufficient fuel in the tank. The engine may stall
on the ramp if there is not enough fuel in the tank.
Length of
Ramp (L)
8.2 ft
(2.5 m)
9.8 ft
(3.0 m)
11.5 ft
(3.5 m)
Height (H)
1.6 ft
(50 cm)
2.0 ft
(60 cm)
2.3 ft
(70 cm)
H
L
31V15621.book 112 ページ ２０１８年１０月１０日 水曜日 午前１１時４分
Summary of Contents for HSM1336i
