Honda Aircraft Company
HA-420
OPERATING PROCEDURES
POM
AND TECHNIQUES
HJ1-29000-005-001
October 30, 2016
3-37
BALKED LANDING
Initiate the balked landing by pressing the TOGA button, advance the
thrust levers to TO, and pitch to maintain V
REF
. Follow the flight
director initially, then adjust the pitch attitude as required to maintain
V
REF
.
NOTE
Accomplish the above steps without reference to the Balked
Landing checklist.
Once clear of obstacles, set the flaps to TO/APPR, retract the landing
gear when a positive rate of climb is confirmed and maintain V
AC
. When
clear of obstacles accelerate to 130 KIAS minimum and retract flaps UP.
It may not be possible to safely retract flaps to UP in case of a balked
landing, if icing conditions were encountered with the flaps extended.
Climb performance capability and increased fuel burn during cruise to
the alternate destination must be considered in this configuration.
CAUTION
Retracting the flaps to UP following an icing encounter
with the flaps extended may result in damage to the flaps
or airframe.
NOTE
See performance tables in the Airplane Flight Manual
(Section 5 – Performance) and either the Quick Reference
Handbook (Volume 1, Performance Section) or the Pilot’s
Operating Manual (Section 2 – Flight Planning).
Accomplish the Balked Landing checklist in accordance with the AFM.
FOR TRAINING PURPOSES ONLY
