Honda Acura NSX 1991, Service Manual

Page: 672 / 1420

Rear Suspension
Torque Specifications
CAUTION:
Replace the self-locking nuts after removal.
l
Replace the self-locking bolts if you can easily thread a non-self-locking nut past their nylon locking inserts.
(It should require 1 (0.1 kg-m, 0.7 lb-ft) of torque to turn the test nut on the bolt).
The vehicle should be on the ground before any bolts or nuts connected to rubber mounts or bushings are tightened.
NOTE: Wipe off the grease before tightening the nut at the ball joint.
*Corrosion resistant bolt/nut
a SELF-LOCKING NUT
1 0 x
FLANGE BOLT
95 (9.5 kg-m,
69 lb-ft)
I
Replace
54
(5.4 k g - m , 39 lb-ft)
NUT
10 x 1.25 mm
*SELF-LOCKING NUT
1 4 x
44 (4.4 kg-m,
32 lb-ft)
Replace.
125
(12.5 kg-m, 90 lb-ft)
N U T
12 x 1.25 mm
60
BOLTS
(6.0 kg-m, 43 lb-ft)
10 x 1.25
60
(6.0 kg-m. 43 lb-ft)
NUT
2 6 x
*FLANGE BOLT
12 x 1.25 mm
(9.5 kg-m, 69 lb-ft)
CALIPER BRACKET
MOUNTING BOLT
110
335 (33.5 kg-m, 242 lb-ft)
NOTE: After tighten-
ing, use a drift to
stake the spindle nut
s h o u l d e r a g a i n s t t h e
d r i v e s h a f t .
85
(8.5 kg-m, 62 lb-ft)
\
(11 kg-m, 60 lb-ft)
\
SELF-LOCKING NUT
12 x 1.25 mm
NUT
1 4 x
Replace.
125
(12.5 kg-m, 90 lb-ft)
Replace.
95
(9.5 kg-m, 69
18-29