Getting Started
18
Navigation System
System Start-up
When you change the power mode to
the ON mode, it takes about 10 seconds
for the navigation system to boot up.
The fi rst screen to appear is the
navigation system globe screen.
The screen then changes to the
Disclaimer
screen:
NOTE:
Driver information will display on the
upper right hand side of the screen.
If there are any unread messages, the
Message icon will display on the bottom
left hand side of the screen.
See page 20 .
System Language Selection
Move the
Interface Dial
to the right
to select
CHANGE LANGUAGE.
On
the
Select a language
screen, you
can select the language to be used by
the entire system by choosing from the
language choices that are displayed.
After you have changed the language
settings, you will be returned to the
Disclaimer
screen.
Read this disclaimer carefully so you
understand it before continuing. Push
in on the
Interface Dial
to select
OK
,
and the
map
screen will appear on the
display. The “OK” cannot be activated
by voice.
If you do not push in on the
Interface
Dial
, the screen will go dark after 30
seconds. (You can also display the
Wallpaper
screen. See page 122 .)
To return to the
Disclaimer
screen,
press any navigation or voice control
button.