System Setup
Navigation System
113
Say or select
Edit Area
to create the
area to be avoided. The following
screen appears:
Either select
Address
or
Map Input
on the
Enter avoid area by
screen.
Each choice provides a slightly different
way to locate the approximate map
display for drawing the area you wish
to avoid.
After selecting the choice, a
map
screen will be displayed.
Rotate the
Interface Dial knob
to select the map scale (available
scales are 1/20, 1/8, and 1/4 mile
scales). Use the
Interface Dial
to
move the crosshairs (red circle) to
the desired start point and push in on
the
Interface Dial
to “set” the start
point. Then move the Interface Dial
in a straight or diagonal direction to
encompass the area to be avoided.
NOTE:
The maximum size of the “Avoid area”
is 800 meters in length or width.
The selected area will be displayed as a
shaded box with a yellow border. Push
in on the
Interface Dial
to set the end
point of the avoided area. To “redraw”
the area, select
CANCEL
and repeat
the area selection process.
