Getting Started
Navigation System
21
Map Screen Description
Zoom In/Out
Rotate the
Interface Dial knob
to
change the map scale. Zooming in
increases the detail, while zooming
out gives you a wide area view. After
changing the scale, give the system a
few moments to update the display.
Map Scrolling
To view other map areas, move the
Interface Dial
left, right, up, or down.
The map will shift in that direction. To
return the map to your current location,
press either the
MAP/GUIDE
, the
CANCEL
, or the
BACK
button on the
steering wheel.
Displaying Current Location
You can see the current address,
latitude, longitude, and elevation at any
time by doing one of the following:
• Use the voice control system and say
“Display the current location.”
• Push in on the
Interface Dial
while displaying the map of the
current location, and select
Map
Information
. Rotate the
Interface
Dial knob
to select
CURRENT
LOCATION
.
The
Current location
screen will
appear on the display.
NOTE:
The elevation will not appear when the
system is temporarily lacking proper
GPS information. The system elevation
may not agree with elevations shown
on roadside elevation signs, and may
fl uctuate plus or minus 100 feet or
more.
You can save the current location in
your Address Book by doing one of the
following (if an Address Book PIN has
been set, you need to enter your PIN.):
• Use the voice control system and say
“Save.”
• Select
SAVE
by rotating the
Interface Dial knob
and push in on
the
Interface Dial
.
Say “Register the current location” on
the
map
screen, and you can register
the current location without displaying
the
Current Location
screen.
Select
Return
to return to the previous
screen.
