Getting Started
14
Navigation System
Using the Voice Control System
You should use the voice control system
as much as possible, and consider
manual entry using the
Interface Dial
as a backup method.
Most of the system’s functions can be
controlled by voice commands activated
with the
TALK
button. To control your
navigation system by voice:
• Press and release the
TALK
button on
the map screen. A voice recognition
screen will be displayed. Or press and
release the
TALK
button on a screen
other than the map screen. A pop-
up voice icon
will appear in the
upper left corner of the screen.
• Wait for the beep.
• Give a voice command. (Voice
commands that the system recognizes
are highlighted.)
Once the microphone picks up your
command, the system changes the
display in response to the command
and prompts you for the next command.
Using the
TALK
button, answer the
prompts as required.
If the system does not understand a
command or you wait too long to give
a command, on the Voice Recognition
Example Commands screen, it responds
with “Pardon? No command was heard.
Please press the
TALK
button and say
a command. To return to the previous
screen, press the BACK button.” On
any other screen, it responds with
“Pardon? No command was heard.
Please press the
TALK
button and
say a command.” If the system cannot
perform a command or the command is
not appropriate for the screen you are
on, a beep will sound.
You can fi nd out which voice
commands are available for a particular
screen by saying “Help.” The system
will display and read the list of
available commands to you. (When
Help
is grayed out, this feature cannot
be used.)
When you speak a command, the
system generally either repeats the
command as a confi rmation or asks you
for further information. If you do not
wish to hear this feedback, you can turn
it off.
However, hearing the feedback will
familiarize you with the way the system
expects commands to be phrased. See
the
Voice Recognition Tutor
setting
in SET UP.
If you hear a prompt such as “Please
use the
Interface Dial
to...” or “Please
choose an area with the
Interface
Dial
,” the system is asking for input that
cannot be performed using the voice
control system.
Improving Voice Recognition
To achieve optimum voice recognition
when using the navigation or Bluetooth
®
HandsFreeLink
®
voice control system,
the following guidelines should be
followed:
NOTE:
Make sure the correct screen is
displayed for the voice command that
you are using. See Voice Command
Index on page 167 .
• It is best if the windows and sunroof
are closed. If they are open, speak
a little louder to overcome the wind
noises.