6 of 22
AII 27573 (0410)
© 2004 American Honda Motor Co., Inc - All Rights Reserved.
11. Install one latch onto the left and right player
brackets. Slide the clip nut onto the display
module pocket flange.
8.
Insert the studs from the player base-bracket into
the holes in the vehicle frame from the back.
Install the two 6 mm flange nuts while holding the
bracket firmly against the vehicle frame. Insert the
vehicle harness clip (removed in step 7) into the
hole in the player base-bracket.
9.
Insert the studs of the left and right player
subbrackets into the holes in the vehicle frame,
and install one 6 mm flange nut on the end of
each stud while pushing each subbracket upward.
7.
Remove the vehicle harness clip from the vehicle
frame, and move the clip out of the way.
10. Get the pocket from the audio attachment kit.
Using a utility knife, cut the two lugs off of the
pocket.
2N28071M
LEFT
PLAYER
BRACKET
SELF-
TAPPING
SCREW (2)
(supplied
with audio
attachment
kit)
SELF-TAPPING
SCREWS (3)
(supplied with
XM radio
attachment kit)
RIGHT
PLAYER
BRACKET
LATCH
LATCH
1 mm
DISPLAY
MODULE
POCKET
DISPLAY MODULE
POCKET FLANGE
CLIP NUT
SCREW
POSITION
BRACKET
HOLE
2306011T
PLAYER BASE-
BRACKET
VEHICLE
FRAME
VEHICLE
FRAME
6 mm
FLANGE
NUT
VEHICLE
HARNESS
CLIP
(Remove.)
6 mm
FLANGE
NUT
VEHICLE HARNESS CLIP
(Insert into the hole of
the player base-bracket.)
2306021T
LEFT PLAYER
SUBBRACKET
RIGHT PLAYER
SUBBRACKET
VEHICLE
FRAME
6 mm FLANGE NUT
VEHICLE
FRAME
2529041T
LUG
(Cut off.)
LUG
12
Set the display module pocket on the pocket with
the cut out facing up. Position the left and right
player brackets on the display module pocket and
pocket, and install five self-tapping screws.
