8 of 22
AII 27573 (0410)
© 2004 American Honda Motor Co., Inc - All Rights Reserved.
2N28110M
Installing the Display Unit
18. Attach the display unit to the display unit pocket:
•
Using isopropyl alcohol on a shop towel, clean
the center on the back of the display unit
where the adhesive backing will attach.
•
Remove the backing from one side of the
double-sided adhesive tape, and attach it to
the display unit.
•
Remove the remaining backing from the
double-sided adhesive tape. Route the display
unit cable through the hole of the display unit
pocket, and attach the display unit to the
display module pocket.
DISPLAY UNIT
Clean with
isopropyl
alcohol.
DOUBLE-SIDED
ADHESIVE TAPE
BACKING
DISPLAY
UNIT
POCKET
PLAYER
With Player:
Without Player:
DISPLAY UNIT CABLE
If the vehicle is not equipped with a cassette/MP3/
CD player, go to step 20; otherwise, go to step 19.
19. Plug the audio subharness cable into the player.
Cassette Player
Make loops in the audio subharness cable, and
secure it with one wire tie, so that the distance
between the ends of the cable connector is
200 mm. Plug the audio subharness cable
connector into the cassette player connector.
CASSETTE
PLAYER
2306051T
200 mm
WIRE TIE
(supplied with
audio
attachment kit)
AUDIO
SUBHARNESS
CABLE
AUDIO
SUBHARNESS
CABLE
CONNECTOR
AUDIO
SUBHARNESS
CABLE
CONNECTOR
Multimedia Player
Make loops in the audio subharness cable, and
secure it with one wire tie so that the distance
between the ends of the cable connectors is
200 mm. Plug the audio subharness cable
connector into the multimedia player connector.
2306061T
MULTIMEDIA
PLAYER
WIRE TIE
(supplied with
audio
attachment kit)
BUS CABLE
200 mm
AUDIO
SUBHARNESS
CABLE
CONNECTOR
AUDIO
SUBHARNESS
CABLE
CONNECTOR
DISPLAY
UNIT
POCKET
DISPLAY
UNIT
CABLE