© 2004 American Honda Motor Co., Inc - All Rights Reserved.
AII 27573 (0410)
13 of 22
36. Insert the studs from the player base-bracket into
the holes in the vehicle frame from the back, then
install the two 6 mm flange nuts while holding the
bracket firmly against the vehicle frame.
39. Unplug the vehicle antenna cable, and plug it into
the FM modulator unit antenna cable. Plug the
other end of the FM module antenna jack into the
vehicle antenna cable.
40. Wrap one EPT sealer around the antenna jack,
and secure the antenna cable to the vehicle
antenna cable with the one wire tie. Secure both
antenna cables to the vehicle harness with one
wire tie.
41. Loop the excess antenna cable from the
FM modulator, and secure the excess cable to
the vehicle harness with two wire ties.
3605081M
PLAYER
BASE-BRACKET
VEHICLE
FRAME
6 mm FLANGE
NUTS (2)
3609041M
DIN
CABLE
XM RADIO
HARNESS
3-PIN
CONNECTOR
FM MODULATOR
UNIT
FM MODULATOR
UNIT HARNESS
CONNECTOR
XM RADIO
HARNESS
37. Connect the XM radio harness 3-pin connector to
the FM modulator unit harness 3-pin connector.
38. Get a DIN cable from the XM radio attachment.
Plug the 90° end of the DIN cable connector into
the FM modulator unit, then route the DIN cable
rearward along the XM radio harness .
3606042M
FM MODULATOR
ANTENNA CABLE
VEHICLE
ANTENNA
CABLE
EPT
SEALER
WIRE
TIE
VEHICLE
HARNESS
WIRE TIE
WIRE TIE
VEHICLE
HARNESS
EXCESS
ANTENNA
CABLE