© 2004 American Honda Motor Co., Inc - All Rights Reserved.
AII 27573 (0410)
15 of 22
49. Get one EPT sealer. Measure the EPT sealer as
shown, and cut it into three pieces.
52. Inside the passengers' compartment, remove the
rear seat cushion by removing the bolt and
releasing the two locks (pull the lock out toward
you).
50. Using isopropyl alcohol on a shop towel, clean the
player panel in the area shown. Attach the two cut
pieces of the EPT sealer to the player panel, and
cut off the excess.
51. Attach the player panel by inserting the clips into
the latches, and install two self-tapping screws
from the kit, or reinstall the two self-tapping
screws you removed in step 13. Remove the
masking tape.
2612010T
EPT SEALER
(Cut off the
marked area.)
PLAYER
PANEL
8 mm
8 mm
EPT SEALER
2306141T
SELF-
TAPPING
SCREW
(Reuse.)
LATCH
PLAYER
PANEL
CLIP
53. Inside the trunk, fold the right and left seatbacks
down by pulling the strap and pushing forward on
the seat.
2527020T
BOLT
LOCKS (2)
REAR SEAT
CUSHION
HOOKS (2)
(Pull down.)
LEVERS (2)
(Pull out.)
2527030T
STRAP
LEFT REAR
SEAT CUSHION
RIGHT REAR
SEAT BACK