ENGLISH | 29
Assembly of pump at Saniquick UF
Now open the installation frame by removing the square cover (pos.2) from the frame (pos.1)). The drawing can be found
in this chapter under the section “Installation of the mounting frame”.
First remove the installation set for the pumps from the shaft. In order to detach the installation set from the pressure
outlet, you must operate the blue lever (B).
A
B
C
D
C
G1¼" IG
G1¼" AG
G1½" IG
1
5
2
3
4
Proceed as follows to attach the installation set to the pump.
1. Only for TP28 and TCV408: Screw the 90° bend of the installation set onto the pressure outlet of your pump.
2. Screw the corresponding transition piece onto the straight mounted bend or directly onto the pressure connection of
the pump.
