5
Now parts R25 are glued to both sides of the fuselage, part R26 should be glued to the bottom
of the fuselage and part R27 to the top of the fuselage, centered between the two parts R25
(see picture). The parts R25-R27 are there to fit the fuselage to the spinner later.
On the top of the fuselage, glue the balsa part R17 between the canopy opening and the
engine bulkhead, here the wood grain runs crosswise.
Be careful here:
part R17 is again beveled on one side due to the engine side pull.
Glue the two symmetrical plywood parts R19 into the canopy R18 in the holes provided.
