20
If a higher attraction is required, the magnets can be embedded a little deeperbecome
The parts for the airbrakes will
be on the blueprint plugged
together and then with liquid
Superglue glued. The then slide
the brake flap into the Cut-out in
the middle part it in.Finally, the
Magnets (diameter 4mm)on the
underside, flush with the holes
provided for this purpose Brake
flap, glued in place become. The
flap is in the Wings inlaid. The
magnets can now on the bottom
of the component KF3 placed be
come. Align the magnets by
itself now. Consequently can
also the rest Magnet from the
Glued underside of the wing
become. The magnetic
Attraction is therefore int his
version already There is enough.
Should
Should our solution be for the
Flap opening used will become
one Servo arm extension
required.Recommend for the
servo arms we our GFK
extension,together with the
matching servo frame as
Accessories are available.For the
functional ice we have also a
video
https://youtu.be/d9o5HwRrMTI
