Holux GPSPORT 260 PRO Manual Download

Page: 121 / 123

121 -

Normal Care and Maintenance

To ensure the unit’s normal operation and extended life span, please

note the following while using and storing:

Keep dry

This product is not waterproof. If it comes into contact with water

spray or is submerged it will seriously damage the components,

resulting in irreversible damage.

Do not drop the unit

If violently impacted or shocked, serious damage may be caused.

Avoid sudden temperature changes

Condensation may occur when entering a warm room on a cold day.

To prevent condensation from damaging the unit, please place into

an airtight plastic bag before sudden temperature changes.

Keep away from strong magnetic fields

When using or storing, please keep away from strong

electromagnetic/radioactive or magnetic field equipment.

Operating temperature

The products operating temperature is between 0°C ~ 40°C; please

do not operate under extreme temperatures.

Avoid exposure to sunlight

Summary of Contents for GPSPORT 260 PRO




























































































































Search results

Summary of Contents for GPSPORT 260 PRO

Reviews:

Related manuals for GPSPORT 260 PRO

Brands by name

Popular brands

Holux GPSPORT 260 PRO, Manual

Search results

Summary of Contents for GPSPORT 260 PRO

Reviews:

Related manuals for GPSPORT 260 PRO

Brands by name

Popular brands