Holux GPSPORT 260 PRO Page 92 Manual Download

Page: 92 / 123

92 -

Note: Speed must be set within the range of 1 to 500 (km/h).

To Set Distance Alert

Press the Left/Right

button to move to left/right.

ii.

Press the Up/Down

button to adjust the value.

Press the OK

button to confirm.

iii. Press the Up/Down

(Y) /

(N) button to check

Enable or leave it blank.

iv. Press the OK

button to confirm and return to the

Alert Menu.

Note: Distance must be set within the range of 1 to 500 (km).

To Set Altitude Alert

Press the Left/Right

button to move to left/right.

ii.

Press the Up/Down

button to adjust the value.

Press the OK

button to confirm.

iii.

Press the Up/Down

(Y) /

(N) button to check

Enable or leave it blank.

iv. Press the OK

button to confirm and return to the

Alert Menu.

Summary of Contents for GPSPORT 260 PRO




























































































































Search results

Summary of Contents for GPSPORT 260 PRO

Reviews:

Related manuals for GPSPORT 260 PRO

Brands by name

Popular brands

Holux GPSPORT 260 PRO, Manual

Search results

Summary of Contents for GPSPORT 260 PRO

Reviews:

Related manuals for GPSPORT 260 PRO

Brands by name

Popular brands