Holux GPSPORT 260 PRO Manual Download

Page: 5 / 123

5 -

CAUTION

Any changes or modifications not expressly approved by the grantee of this

device could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

For product available in the USA/Canada market, only channel 1~11 can be

operated. Selection of other channels is not possible.

RF Exposure Warning

This equipment must be installed and operated in accordance with provided

instructions and the antenna(s) used for this transmitter must be installed to

End-users and installers must be provided with antenna installation instructions

and transmitter operating conditions for satisfying RF exposure compliance.

Summary of Contents for GPSPORT 260 PRO




























































































































Search results

Summary of Contents for GPSPORT 260 PRO

Reviews:

Related manuals for GPSPORT 260 PRO

Brands by name

Popular brands

Holux GPSPORT 260 PRO, Manual

Search results

Summary of Contents for GPSPORT 260 PRO

Reviews:

Related manuals for GPSPORT 260 PRO

Brands by name

Popular brands