Holux GPSPORT 260 PRO Manual Download

Page: 102 / 123

102 -

Wireless Link

The GPSport 260 Pro is using ANT+

to collect and transfer sensor data.

The three sport sensors supported

are HRM (heart rate monitor), speed

sensor and cadence.

Press the OK button

to enter the

setting menu.

Activate Wireless Link

Users have to activate the GPSport 260 Pro wireless link before

they connect the GPSport 260 Pro with sport sensors. If the

wireless link is not yet activated, the setting menu displays

“

Activate

” for selection, otherwise, “

Deactivate

” is displayed

when the device is active.

If the wireless link is not activated in advance,

a message prompts “ANT+ is inactive” to

notify users that 2.4G is in OFF mode while

scanning.

Press OK button

to activate it.

Summary of Contents for GPSPORT 260 PRO




























































































































Search results

Summary of Contents for GPSPORT 260 PRO

Reviews:

Related manuals for GPSPORT 260 PRO

Brands by name

Popular brands

Holux GPSPORT 260 PRO, Manual

Search results

Summary of Contents for GPSPORT 260 PRO

Reviews:

Related manuals for GPSPORT 260 PRO

Brands by name

Popular brands