-
23 -
Installing Cadence
♦
The cadence comes in two parts, the cadence sensor itself and the
magnet.
♦
Place the sensor on the chain stay. Rotate the crank to make sure
the sensor will not touch the rotating crank. If the sensor touches
the crank, move the sensor slightly upwards. Use the cable ties to
secure the cadence sensor.
♦
Place the magnet on the crank. Use two cable ties to secure the
magnet.
♦
The cadence sensor and the magnet should pass facing each
other with no more than 25 millimeters between the two to transmit
accurate data.
Install the Cadence Step by Step
①
.
②
.
The cadence comes in two parts,
the cadence sensor itself and the
magnet.
The cadence sensor should be
placed on the chain stay, and the
magnet on the crank.
Place the rubber pad on the chain
stay.
Place the cadence sensor onto the
rubber pad.
Summary of Contents for GPSPORT 260 PRO
