Hologic SUROS ATEC Emerald Service Manual Download Page 15 | Manualshive

Page: 15 / 48

background image

ATEC

Pearl, ATEC Sapphire and ATEC Emerald

Breast Biopsy and Excision System

LIT309:RevB

This document contains information that is confidential and proprietary to Suros Surgical Systems, Inc., a Hologic company. The document
and/or information contained herein may NOT be disclosed to any party without the express written consent of Suros. Covered by one or
more of the following patents and other patents pending: 6,758,824 and 6,638,235. © 2007 Suros Surgical Systems, Inc. ATEC, Suros and
Suros Compassionate Technologies are trademarks or registered trademarks of Suros in the United States and other countries. All rights
reserved.

14

3.6

Preventative Maintenance

Acquire a preventative maintenance kit.  Parts from the preventative maintenance kit will
be used throughout this procedure.  Other kits and parts may be required to replace
broken parts.  In these cases, the following steps will suggest the appropriate parts or
kits.

SR6426-01   Preventative Maintenance Kit, ATEC Pearl / ATEC Emerald
SR6427-01   Preventative Maintenance Kit, ATEC Sapphire

3.6.1 Handpiece Connections

Inspection

Parts:

Tools:

Qty Part #

Description

Steris Pads 1608-G4

N/A N/A

N/A

MRI, ATEC handpiece

STX, ATEC handpiece

Console Interface, right side.

1. Inspect the quick disconnect, MRI and Motor/Cylinder fittings and the pinch valve on

the right user interface panel.

2. Clean as needed with Steris pads
3. Turn the unit on, with no handpiece connected, to verify that no air is leaking through

the quick disconnect fittings.

4. Connect an ATEC handpiece to the quick disconnect fittings and pinch valve. Check

the functional fit with a handpiece to assure that the connection is secure.

5. Run a few biopsy cycles by depressing the footswitch and listen for leaks. Test both

MRI and STX if applicable.

6. If the quick disconnect fittings leak or if there is a problem with the pinch valve,

request new parts and install, and follow the necessary steps in procedure SR6607.

a. SR6047-01

Quick Disconnect, MRI

b. SR6046-01

Quick Disconnect, Motor/Cylinder

c. SR6045-01

Pinch Valve

«
...
13
14
15
16
17
...
»

Summary of Contents for SUROS ATEC Emerald

















































Reviews:

No comments

Related manuals for SUROS ATEC Emerald

Brand: Landoll Pages: 52

Brand: JBSYSTEMS Light Pages: 14

WJHD309 - DIGITAL DISK RECORDER

Brand: Panasonic Pages: 7

WJ-ND300 Administrator Console

Brand: Panasonic Pages: 24

WJHD309A - DIGITAL DISK RECORDER

Brand: Panasonic Pages: 79

Brand: Danelec Pages: 67

Brand: Faderfox Pages: 8

Brand: Garmin Pages: 12

Brand: Garmin Pages: 13

Brand: MAGIC FX Pages: 25

Frontier FC5706

Brand: OHAUS Pages: 47

Brand: Ocutech Pages: 4

Brand: H&S Pages: 54

Brand: Samson Pages: 2

Brand: Yamaha Pages: 139

Brand: Yamaha Pages: 19

Brand: Yamaha Pages: 32

Brand: Zimmer Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands