manualshive.com logo in svg

Holiday imperial 2001, Owner'S Manual, Page: 99 / 301

Share
Download
Holiday imperial 2001 Owner'S Manual Download Page 99

NOTE: The microwave is for food preparation only. Do not use

the microwave to dry clothes, newspapers, shoes or other items.

Safety Lock:

The microwave comes with a safety lock feature. This feature prevents the

oven from operating accidentally. To use this feature:

• Press the 

CUSTOM HELP

pad. 

• Press the 

1

pad. 

• Press the 

START/TOUCH-ON

pad. 

The oven is now locked. If any button is pressed the word 

LOCK

appears

on the screen and the oven will not operate. The fan and hood light are still
operational with the Safety Lock feature on. To return the oven to normal oper-
ation:

• Press the 

CUSTOM HELP

pad. 

• Press the 

1

pad.

• Press the 

START/TOUCH-ON

pad. The oven will resume normal 

operation.

Setting The Clock:

• Press the 

STOP/CLEAR

pad.

• Press the 

CLOCK

pad.

• Enter correct time in sequence using the number pads.
• Press the 

CLOCK

pad to begin time.

NOTE: The clock is a 12 hour clock only. When AC power is

discontinued the clock time will be erased.

Kitchen Timer:

• Press the 

KITCHEN TIMER

pad. 

• Using the number pads enter minutes and seconds, or 00 if no seconds. 
• Press the 

START/TOUCH-ON

pad to begin timer. Timer end will be 

signaled by one long beep.

Press the STOP/CLEAR pad to:

• Erase, if you make a mistake during programming.
• Cancel the kitchen timer.
• Stop the oven temporarily during cooking. 

(Press the 

START/TOUCH-ON

pad to resume.)

• Return the time of day to the display.
• Cancel a program during cooking (touch the pad twice).

Turntable On/Off:

• Press 

TURNTABLE ON/OFF

pad to stop or start the turntable.

• Enter the cook time desired minutes and seconds.
• Enter power level desired.
• Press the 

START/TOUCH-ON

pad.

Appliances

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

I M P E R I A L

4 • 9 9

Summary of Contents for imperial 2001














































































































































































































































































































Reviews:

No comments