manualshive.com logo in svg

Holiday imperial 2001, Owner'S Manual, Page: 5 / 301

Share
Download
Holiday imperial 2001 Owner'S Manual Download Page 5

SIGNS

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

This sign indicates a NOTE .

This sign indicates INSPECTION is required

.

This sign indicates a WARNING or a CAUTION with 
additional information attached.

This sign indicates AS SEMBLY/INSTALLATION or
DISAS SEMBLY/REMOVAL is necessary.

This sign indicates the specified part requires
OIL/LUBRICATION.

This sign indicates a reference to the Warranty
INFORMATION FILE located within the gray box inside 
your motorhome.

Copyright 2000 Holiday Rambler Corporation. All rights

reserved. Imperial is a trademark of Holiday Rambler Corporation.
All other trademarks or registered trademarks are property of
their respective holders. Brand name products of other companies
mentioned in this manual are not endorsed by Holiday Rambler
Corporation.

Summary of Contents for imperial 2001














































































































































































































































































































Reviews:

No comments