31
V60T/July 2020/V1.1
VERSADRIVE
RAPID LOCK ADAPTORS
The
VERSADRIVE
V85T is supplied as standard with a
VERSADRIVE
RAPID LOCK Weldon adaptor.
The
VERSADRIVE
RAPID LOCK Weldon adaptor can also be used to adapt other magnetic drill.
This adaptor fits directly into the Weldon arbor of the machine to allow rapid loading of all
VERSADRIVE
tools/cutters.
VERSADRIVE
RAPID LOCK offers the following advantages:
•
Single handed tool change.
•
RAPID and secure tool changing.
•
Quick Release mechanism.
•
Wide variety of
VERSADRIVE
cutting tools available, Drill, Tap, Countersink, Ream, etc.
•
No tools required (Chuck wrench, Allen Key, etc.)
6.3
Annular cutters
Annular cutters only cut material at the periphery of the hole, rather than converting the entire hole
to shavings. As a result, the energy required to make a hole is lower than for a twist drill.
When drilling with an annular cutter, it is not necessary to drill a pilot hole.
WARNING:
Do not touch the cutter or the parts close to the cutter immediately after use, they may be extremely
hot and cause burns to the skin. Ensure nobody is in the work area where the metal core is ejected.