14
V60T/July 2020/V1.1
To remove the feed handle from the machine, first lower the slide until it is at its lower most
position.
Unscrew the M6 cap screw (item 1) and remove the pinion shaft retainer (item 2). The pinion
shaft and feed handle assembly (item 3) can now be withdrawn.
[image 3]
It is possible to position the feed handle on either side of the machine (image 4).
Method of removal and refitting is as in 3.1.1 and 3.1.2 above.
IMPORTANT:
If the feed handle is repositioned, the operator must have good access to the controls
at ALL times.
[image 4]
