24
V60T/July 2020/V1.1
5.3
Speed Control
The
VERSADRIVE V60T
has both Mechanical and Electronic speed control.
The mechanical speed selector is 2 position a slider, positioned on the side of the motor gearbox.
The mechanical speed position should be set first, choosing the correct gear ratio will provide the
best torque.
ALWAYS check that the mechanical speed selector is fully in position before starting the motor.
The electronic speed control is via a rotary thumbwheel graduated 1-5 on the side of the motor.
The electronic speed control should be used as a fine adjustment after the mechanical speed has
been set.
The speed ranges are shown in the table below.
Gear Selector
Speed Range
Position
120-250
Position
180-450
[image 14] - Upper inset
–
Electronic Speed Control Lower inset - Mechanical Speed Selector
