Holder A-Trac 5.58 P, Operating Instructions Manual

Page: 91 / 190

Operating Instructions
145 146
89
A 5.58 / A 5.58 P
Operating the Implements
DANGER
Due to the variety of implements and con-
nections, however, we recommend a trial run
of the movement at a safe place without dan-
ger to persons or risk of material damage
before starting operation.
Two types of control levers can be installed: control levers
(1) and multi-function levers (3).
Control Lever Functions
The functions are shown on the notice plate (1).
NOTE
Behind the control lever (4) there is a lock
knob (5) for locking or releasing the motions
of the lever.
The following movements are possible:
- Lock knob (5) lifted and turned (lever free to move).
- Push the control lever (4) forward:
•
The implement is lowered.
You can stop the movement by releasing the lever.
- Pull the control lever (4) back:
•
The implement is lifted.
Functions of Lock Knob
If the lock knob (5) is lowered, the levers can not be oper-
ated.
NOTE
If the lever movement is locked, you can pre-
vent any unintended movement of the imple-
ment through accidental contact with the le-
ver.
Transport lock for road travel.