Holder A-Trac 5.58 P, Operating Instructions Manual

Page: 94 / 190

A 5.58 / A 5.58 P
Operating Instructions
92
145 146
Operating the Implements
Engaging the Front PTO
NOTE
The front PTO can be turned on with the PTO
selector lever (1) at the front left of the gear-
box. The lever positions are shown on the
plate.
- The PTO clutch lever (3) must be turned off.
- Move the PTO selector lever (4) up to engage the
front PTO.
DANGER
Before engaging the PTO, make sure no one
is standing close enough to the tractor and
the driven implement to be hurt.
- Pull the PTO clutch lever (3) down fast. The front
PTO is turned on.
- To disengage the PTO, return the PTO clutch lever
(3) to the vertical position.
- Push the PTO selector lever (1) down again.
DANGER
After the installed implement is disengaged,
it can continue to run. Wait until the imple-
ment is stationary before working on it again.
1
Bild_068
Bild_155
3