Holder A-Trac 5.58 P Operating Instructions Manual Download

Page: 54 / 190

A 5.58 / A 5.58 P

Operating Instructions

145 146

Taking into Service

Checking the Clutch Fluid Level

Check the level at the clutch fluid reservoir (1).

The fluid level must between the Min and Max mark-
ing at the reservoir.

Top up brake fluid as specified in the maintenance
manual.

Adjusting the Steering Wheel

NOTE

The tilt of the steering wheel can be set to a
comfortable position.

DANGER

Do not adjust the steering wheel while driv-
ing.

Loosen the lever (2).

Adjust the tilt of the steering wheel.

Retighten the lever (2).

Loosen the lever (1).

Adjust the height of the steering wheel.

Retighten the lever (1).

Bild_033

Bild_034

Summary of Contents for A-Trac 5.58 P































































































































































































Search results

Summary of Contents for A-Trac 5.58 P

Reviews:

Related manuals for A-Trac 5.58 P

Brands by name

Popular brands

Holder A-Trac 5.58 P, Operating Instructions Manual

Search results

Summary of Contents for A-Trac 5.58 P

Reviews:

Related manuals for A-Trac 5.58 P

Brands by name

Popular brands