Holder A-Trac 5.58 P, Operating Instructions Manual

Page: 162 / 190

A 5.58 / A 5.58 P
Operating Instructions
160
145 146
Maintenance every 1500 Service hours
Filling Oil
- Insert and tighten the vent screw (2) of the left axle
with a new gasket. Check for leakages.
- Lift up the right side of the tractor. (at offset axles lift
up rear)
- Unscrew sight glass (6).
- Fill recommended gear oil through the filler plug hole.
Filling quantity with offset axles ........... approx. 12.5 L
Filling quantity without offset axles ..... approx. 10,5 L
- Refit sight glass the with a new gasket and tighten it.
Check for leakages.
- Place the tractor on level ground.
- Insert and tighten vent screw (1) of the right axle with
a new gasket. Check for leakages.
- Check oil level at the sight glass (6).
The oil level must be visible in the middle of the sight
glass.
1
2
Bild_133
6
Bild_134