Holder A-Trac 5.58 P Operating Instructions Manual Download

Page: 93 / 190

Operating Instructions

145 146

A 5.58 / A 5.58 P

Operating the Implements

Engaging the Rear PTO

ATTENTION

Never engage the PTO with the engine off.

Increase the engine speed to 1500-1800 rpm.

Pull the clutch lever (1) down fast. The pressure point
must be passed noticeably. The rear PTO is engaged.

To disengage it, return the PTO clutch lever (1) to the
vertical position.

If the PTO is no longer required, return the lever (2) to
position "0".

DANGER

After the installed implement is disengaged, it
can continue to run. Wait until the implement
is stationary before working on it again.

Bild_154

Summary of Contents for A-Trac 5.58 P































































































































































































Search results

Summary of Contents for A-Trac 5.58 P

Reviews:

Related manuals for A-Trac 5.58 P

Brands by name

Popular brands

Holder A-Trac 5.58 P, Operating Instructions Manual

Search results

Summary of Contents for A-Trac 5.58 P

Reviews:

Related manuals for A-Trac 5.58 P

Brands by name

Popular brands