Holder A-Trac 5.58 P Operating Instructions Manual Download Page 74

Page: 74 / 190

A 5.58 / A 5.58 P

Operating Instructions

145 146

Special Operating Instructions

NOTE

The arrows on the tyres must show in the
forward direction of rotation.

Re tighten the wheel nuts to the specified torque.

Torque to ............................................................ 215 Nm

Bild_055

Adjusting the Track Width

You can widen the track width of the tractor by adding
spacers (1).
You have a choice of 3 different spacers.

DANGER

Observe the safety notes on safe parking and
jacking up for the wheel change in the main-
tenance manual.

Remove the wheels. Turn the wheels inside out or
install the selected spacers.

ATTENTION

The spacers must be mounted on the front
and rear axle so that the same track width is
obtained.

Summary of Contents for A-Trac 5.58 P































































































































































































Search results

Summary of Contents for A-Trac 5.58 P

Reviews:

Related manuals for A-Trac 5.58 P

Brands by name

Popular brands

Holder A-Trac 5.58 P, Operating Instructions Manual

Search results

Summary of Contents for A-Trac 5.58 P

Reviews:

Related manuals for A-Trac 5.58 P

Brands by name

Popular brands