Holder A-Trac 5.58 P Operating Instructions Manual Download Page 166

Page: 166 / 190

A 5.58 / A 5.58 P

Operating Instructions

164

145 146

Maintenance every 1500 Service hours

Checking or Cleaning the Implement Hydraulics Oil
Suction Filter

Remove cover (5).

Remove hose clamp (4) and pull down hose.

Unscrew fastening screws (1) and pull out filter
housing (2).

ATTENTION

Observe the instructions for handling fuels
and lubricants.

Cleaning:

Wash the sieve-star filter with clean Diesel fuel.

Replacement:

Unscrew the sieve-star filter from the filter housing
with a 50mm open-ended wrench.

Screw the new filter with a new toroidal sealing ring
onto the filter housing.

Refit oil drain plug (3) with new gasket.

The installation of the suction filter is carried out in the re-
verse order of removal.

Bild_157

Summary of Contents for A-Trac 5.58 P































































































































































































Search results

Summary of Contents for A-Trac 5.58 P

Reviews:

Related manuals for A-Trac 5.58 P

Brands by name

Popular brands

Holder A-Trac 5.58 P, Operating Instructions Manual

Search results

Summary of Contents for A-Trac 5.58 P

Reviews:

Related manuals for A-Trac 5.58 P

Brands by name

Popular brands