Hokkaido HCND 261 X User Manual Download Page 34

Page: 34 / 40

- 34 -

TROUBLESHOOTING

• You smell something burning.

• Obstacles or water enter the Unit.

• Water leaks from Indoor Unit.

• Other malfunctions are observed (see the following Table).

Never try to repair the Air Conditioner by yourself

CAUTION

If one of the following malfunctions occur, immediately stop operation, turn off the main switch

and contact the Authorized Technical Service:

Fuse or breaker
often breaks off.

Fuse often

breaks off.

3 minutes

go by,

but why

Malfunction is observed on
TV, radio or other devices.

Switch does not actuate
surely.

When faulty operation movement is observed when the ON/OFF button is pressed.

Even after pulling out the power plug and restarting the operation after 3 minutes, faulty

movement does not

disappear.

Abnormal noise is heard
during operation.

Power plug or cable is

excessively hot.

Covering of power plug or

cable is broken.

Summary of Contents for HCND 261 X









































Search results

Summary of Contents for HCND 261 X

Reviews:

Related manuals for HCND 261 X

Brands by name

Popular brands

Hokkaido HCND 261 X, User Manual

Search results

Summary of Contents for HCND 261 X

Reviews:

Related manuals for HCND 261 X

Brands by name

Popular brands