- 13 -
Remove the cover of the batteries’ box by sliding it as
indicated on the cover itself.
Replace used batteries with new ones. Pay attention to
insert them correctly according to polarities.
After replacing the batteries, press “RST” button (“reset”)
on remote controller.
If remote controller is not working well, you can take out
the batteries to clear off the display. Fit in batteries again
after a few minutes.
NOTE:
Please use only new batteries of the same brand and type. If you are not going to use the air conditioner
for a long period, remove the batteries from the remote controller because it could get damaged by acid leakage.
The average batteries’ life is approximately one year.
Replace the batteries when the signal from the remote controller becomes weak and the Indoor Unit can not receive
it properly, or the indications on the display screen become blurred.
INFRARED REMOTE CONTROLLER
Replacement of batteries
For remote controller, 2 “AAA” type
batteries (1,5V) must be used.
•
•
•
•
CLK button
RST button
It does not work on these Models.
This button let computer reset.
(Push the RST button with the tip
of a ball pen or with a sharped
article).
Unload the back cover.
Summary of Contents for HCND 261 X
Page 38: ...NOTES ...
