- 29 -
CLEANING THE AIR CONDITIONER
WARNING
Before starting the cleaning:
1 - Stop the appliance by pressing ON/OFF button on remote controller
2 - Move the circuit breaker to “OFF” or “0” position
3 - Pull the plug out of the power socket
4 - To reach the Unit, please use a stepladder or other appropriate bearing strong enough
to ensure your safety.
• Ne
ver use any abrasive sponge for cleaning, to avoid scratching the Unit’s surfaces.
• If the gr
ille is open or has been removed, do not touch the metallic flaps of the heat exchanger, as
the flaps are sharp and may hurt you.
• Do not e
xpose the grille or the Unit to direct sunlight, to avoid discolouring or deforming them.
Check regularly that the air inlet and outlet are not obstructed by dust or dirt in general.
For any other cleaning or maintenance of Outdoor Unit, always contact the Authorized Technical
Service.
NOTES:
Cleaning the Indoor Unit and Remote Controller
Outdoor Unit’s cleaning
No
Use a soft and dry cloth to clean the Indoor Unit and
the Remote Controller, or use a vacuum cleaner to
clean them.
•
If the Indoor Unit is very dirty, use a piece of cloth and
soak it with neutral home-use detergent to do the
cleaning. The cloth must be soaked in lukewarm water.
The use of very hot water (over 40°C) may discolour
and/or deform the plastic parts.
Rinse in clean water and dry well in the open air.
The presence of humidity on the inlet grille may cause
electric shocks.
•
Never use a damp cloth to clean the Remote Controller
nor use benzine, thinner, polishing powder or any
similar solvents for cleaning the Indoor Unit.
Chemical products may crack or deform the plastic
surface of the air conditioner.
•
Thinner
Household
Drain
Cleaner
No
CAUTION
Do not use water to clean the inside of the air conditioner.
Exposure to water may destroy the insulation, leading
to possible electric shock.
Summary of Contents for HCND 261 X
Page 38: ...NOTES ...
