Hokkaido HCND 261 X User Manual Download Page 15

Page: 15 / 40

- 15 -

Outline of the remote controller’s display

INFRARED REMOTE CONTROLLER

TEMPERATURE

This indicator shows the set

temperature.

The room temperature

range is from 16°C to 32°C.

(Temperature is automatically set

at 25°C and unadjustable in AUTO

mode and DRY mode).

AUTO MODE

This indicator shows that the

Automatic mode has been

selected.

COOLING MODE

This indicator shows that the

Cooling mode has been

selected.

DRY MODE

This indicator shows that Dry

mode has been selected.

HEATING MODE

This indicator shows that Heating

mode has been selected.

FAN MODE

This indicator shows that Fan

mode has been selected.

SWING

TIMER

Indicates TIMER time.

This indicator shows the up/down

air flow direction:

• natural fl

ow: is displayed.

• s

wing: is flashing.

• fix

ed wind air: is displayed.

- It would be automatically set

at fix

ed wind air flow direction in

DRY mode.

SLEEP

This indicator is displayed

during SLEEP operation.

TURBO

This indicator is displayed

during TURBO operation.

KEY LOCK

This indicator is displayed when

the keyboard has been locked.

FAN SPEED

This indicator shows the set

fan speed:

• LO

W ( is displayed)

• MED ( is displa

yed)

• HIGH ( is displa

yed)

•

AUTO ( is flashing).

NOTE: The Figure below shows all indications for the purpose of explanation, but
practically only the pertinent parts are indicated.

This indicator shows the left/right

air flow direction:

HKED 511, 631 X Models:

AIR FLOW

• s

wing: is flashing.

• fix

ed wind air: is displayed.

Summary of Contents for HCND 261 X









































Search results

Summary of Contents for HCND 261 X

Reviews:

Related manuals for HCND 261 X

Brands by name

Popular brands

Hokkaido HCND 261 X, User Manual

Search results

Summary of Contents for HCND 261 X

Reviews:

Related manuals for HCND 261 X

Brands by name

Popular brands