1.0 INTRODUCTION
Herewith we would like to thank you for your buying one of our tire changer. Our machines have been projected and
developed to mount/demount standard end Run-Flat tires especially.
In order to avoid damages and to keep the machine in a good state, it will be sufficient to follow the manual instruc
-
tions, which have to be read and understood completely.
1.1 Tire changer identification data
In case you were in need of service or spare parts, please communicate machine model and serial number.
Here following, we summarize your own tire changer identification data for your perusal.
In case the identification data should be different from the ones you find on the machine label, the machine label data
will be considered as valid.
1.2 Manufacturer data:
See the conformity declaration you find at page 2 of this manual and machine data label.
1.3 Machine identification label:
This manual has to be considered part of the machine.
Before using the tire changer, read the instructions carefully, because they provide useful information relevant to ma-
chine use safety and machine maintenance.
Keep this manual for every further reference.
NOTE:
it may occur that some machine parts or elements could differ from the pictures you find in this manual.
2.0 GENERAL INFORMATION
The tire changer has been projected to mount and demount cars and commercial light vehicles standard tires, new ge-
neration tires, UHP tires equipped with iron or alloy rims. The tire changer is able to mount and demount big size wheels.
The machine has not to be used to demount inflated or dirty tires, to straighten rims or to remove small rims from indu
-
strial wheels. All these operations are
FORBIDDEN
.
6
Summary of Contents for Megamount Twister EVO CP
