24
20.0 SHELVING
In case of a long shelving period, it is necessary:
- Disconnect the power supply;
- Protect the parts which could be damaged against dust;
- Grease the parts which could be damaged in case of drying process.
In case the tire changer is kept in function again:
- Follow instructions at chapter 9 of this manual
- Replace damaged parts, with reference to spare parts list. Every intervention should be executed by trained personnel.
Caution! To waste dispose the machine properly, check the notes RAEE and ROHS
on conformity declaration.
General precautions
- Avoid contact with skin.
- Avoid oil vaporizing in the atmosphere.
- Avoid oil splash.
- Wear proper clothes, glows and protection glasses.
- Do not use oily rags.
- Do not eat or smoke with oily hands.
IFirst aid instructions
-In case of oil swallowing, DO NOT induce vomiting and go to nearest Medical Centre with the swallowed oil features
immediately.
-In case the oil gets in touch with eyes, rinse with water till inflammation stops. Then go to nearest Medical Centre.
-In case oil gets in touch with skin, rinse with water and soap. Do not use solvent or inflaming cleansers.
Exhausted oil waste disposing
Do not disperse exhausted oil in the environment. Keep it in a proper tank, and waste dispose it in dedicated centre or
deliver it to authorized companies.
Spouting or oil leakage
Repair the leakage cause and stop emission through absorbing materials. Clean accurately the oily surfaces with
degreasing cleansers and waste dispose the residuals in compliance to National Laws and Rules.
21.0 OIL TREATMENT
OIL IS EXTREMELY POLLUTING! DO NOT SPOUT OR DISPERSE IT INTO THE ENVIRONMENT.
Keep the oil and waste disposing it in compliance to the National Laws and Rules.
18.0 REPOSITIONING
Before reposition tie tyre changer in a different working area, lock the moving parts (i.e. press system) and
disconnect all the power supply. Re-install the machine following instructions at chapter 9.0 INSTALLATION of this
manual.
The power supply connection operations, the connections and safety systems inspection should be issued
by skilled personnel only.
19.0 SCRAPPING
In case you decide to keep the tire changer inoperative, the manufacturer suggests to make it inoperative removing
the power supply connection in compliance to the National Laws and Rules in force.
The tire changer is a heterogeneous waste, so it has to be disassembled in homogeneous parts (electrical elements,
plastic parts and metallic parts) and waste disposed in compliance to the National Laws and Rules in force.
25
22.1 Routine maintenance operations
It is necessary that the user or the maintenance operator follow the below instructions carefully, in order to keep the tire
changer in perfect order and ensure tire changer long last.
- Clean the machine daily from mud and other residuals which would keep the spindle from sliding.
- Check regularly tools moving and grippers clamping correctly.
- Check daily the wear of mounting tool plastic inserts and of the rubber/plastic alloy rims protections.
In case the protections were worn out or damaged, replace them with new ones.
22.0 MAINTENANCE
Before starting any maintenance intervention, disconnect the power supply, the pneumatic supply
and run down the air into the cylinders through the controls.
- Check the oil level, which should be
between MIN and MAX, routinely. In
case, unscrew the oil tank and add
pneumatic plant oil ISO HG (Esso febis
K32; Mobile Vacouline oil 1405; Kluber
Airpress 32)
- Be sure that condensation does not
get over the visual level, for a correct
functioning of the 10 bar pressure re-
gulating device.
- Rotating clockwise the run-off valve ,
discharge condensation weekly . Keep
the pneumatic supply connected.
- Every 60 days , disconnect machine
from the pneumatic supply and disas-
semble the filter reservoir and remove
residuals.
- Check every two weeks that every 3
self-centring working table cylinders
complete cycles (open/closed), an
oil drop drops inside the lubrication
measuring device. In case it does not
occur, regulate the screw through a
screw-driver.
27
Summary of Contents for Megamount Twister EVO CP
