14
WHEEL LOCKING ON THE SPINDLE
(
16
) Quick-fit rim clamping device
Threaded hub
Release botton
Ring nut
Foldable
handle
Knob
Centring cone
Locking slots
CAUTION!
Be sure the wheel is locked on the spindle.
ATTENTION!
Do not activate the lifter while the wheel is locked on the spindle. This could damage the machine
and injure people nearby.
Fig. 1
Fig. 2
1) Insert the quick-fit rim clamping device (
16
) in the wheel central hole, making
sure the locking slots are aligned to the pins inside the spindle [fig. 1] and [fig. 2].
2) Through the knob, press the quick-fit rim clamping device and rotate clockwise
to lock it [fig. 2].
3) Lower the ring nut, so that the
cone
centers the wheel on spindle:
keep the
cone raised from the rim central hole.
4) Through the handle, rotate clockwise to lock it
[fig. 3].
Fig. 3
u
v
CAUTION:
The manufacturer suggests to use
the cone plastic protection to avoid
rims damage.
15
Pay attention to the automatic mouvement of the arm.
1)
CAUTION:
make sure the horizontal arm is unlocked; in case it is locked, release it pressing the botton (
13
)
Press the foot control (
1
) to position the pole in working position.
14.0 TIRE DEMOUNTING PROCEDURE WITH LEVER-LESS SYSTEM
2) Pull down the mounting tool through the handle and po-
sition it on the rim edge. lock it with the button (
13
)
[fig. 2].
NOTE!
Start the tire demounting procedure with the inflating valve positioned
5-10 cm far from the tool [fig. 4].
NOTE!
Make sure the tool is positioned
3 mm
far
from the rim [fig. 3].
Fig. 4
Fig. 3
3
3
(13)
1
2
Fig. 2
17
Summary of Contents for Megamount Twister EVO CP
