22
16.0 INFLATING OPERATIONS
The tire deflagration and rim break could bless the operator seriously or even
kill the user.
Check the tire and rim wear condition in order to find out defeats before star
ting inflating.
Our tire changer have a max. inflating pressure of 3.5 bar (50 PSI).
The machine manufacturer suggests never exceed the tire manufacturer sugge
sted inflating pressure.
Keep hands and body away from tire during inflating operations.
Inflate tires carefully. Follow instructions strictly because the tire changer has not been projected
and manufactured to protect the user and people nearby in case of accidental tire deflagration.
• Connect the inflating hose to tire valve (fig. 2).
• Check the tire and the rim are greased sufficiently; in case it is needed, grease them.
• Press and release the inflating foot control frequently (
3
) (fig. 3), checking the pressure on the manometer
while releasing, till the tire beads on the rim completely.
• Go on inflating up to reach the tire pressure suggested in the car manual. Inflate in short timespan checking
the tire pressure always.
• Press the deflating button to reduce the tire pressure, if necessary.
CAUTION! In case the tire does not bead to the max pressure of 3.5 bar, while inflating, repeat the
bead breaking procedure and grease the tire. Inflate again.
Manometer
Deflating button
Fig. 1
Inflating foot control
Fig. 2
Fig. 3
24
Summary of Contents for Megamount Twister EVO CP
