24
20.0 SHELVING
In case of a long shelving period, it is necessary:
- Disconnect the power supply;
- Protect the parts which could be damaged against dust;
- Grease the parts which could be damaged in case of drying process.
In case the tire changer is kept in function again:
- Follow instructions at chapter 9 of this manual
- Replace damaged parts, with reference to spare parts list. Every intervention should be executed by trained personnel.
Caution! To waste dispose the machine properly, check the notes RAEE and ROHS
on conformity declaration.
General precautions
- Avoid contact with skin.
- Avoid oil vaporizing in the atmosphere.
- Avoid oil splash.
- Wear proper clothes, glows and protection glasses.
- Do not use oily rags.
- Do not eat or smoke with oily hands.
IFirst aid instructions
-In case of oil swallowing, DO NOT induce vomiting and go to nearest Medical Centre with the swallowed oil features
immediately.
-In case the oil gets in touch with eyes, rinse with water till inflammation stops. Then go to nearest Medical Centre.
-In case oil gets in touch with skin, rinse with water and soap. Do not use solvent or inflaming cleansers.
Exhausted oil waste disposing
Do not disperse exhausted oil in the environment. Keep it in a proper tank, and waste dispose it in dedicated centre or
deliver it to authorized companies.
Spouting or oil leakage
Repair the leakage cause and stop emission through absorbing materials. Clean accurately the oily surfaces with
degreasing cleansers and waste dispose the residuals in compliance to National Laws and Rules.
21.0 OIL TREATMENT
OIL IS EXTREMELY POLLUTING! DO NOT SPOUT OR DISPERSE IT INTO THE ENVIRONMENT.
Keep the oil and waste disposing it in compliance to the National Laws and Rules.
18.0 REPOSITIONING
Before reposition tie tyre changer in a different working area, lock the moving parts (i.e. press system) and
disconnect all the power supply. Re-install the machine following instructions at chapter 9.0 INSTALLATION of this
manual.
The power supply connection operations, the connections and safety systems inspection should be issued
by skilled personnel only.
19.0 SCRAPPING
In case you decide to keep the tire changer inoperative, the manufacturer suggests to make it inoperative removing
the power supply connection in compliance to the National Laws and Rules in force.
The tire changer is a heterogeneous waste, so it has to be disassembled in homogeneous parts (electrical elements,
plastic parts and metallic parts) and waste disposed in compliance to the National Laws and Rules in force.
26
Summary of Contents for Megamount Twister EVO CP
