10. Built-in devices
172
Controlling the satellite system
The satellite system is controlled via the TV or manually using
the control unit.
For information on adjusting the settings for the TV, e.g.
language and picture settings, please refer to the TV
manufacturer’s operating instructions.
To switch off
• Press the red power button on the remote control or the
power button located directly on the TV (standby mode).
• Press the main switch on the TV. The TV has now been
switched off.
Adjusting the satellite and positioning the satellite system
After the TV has been switched on, an initial installation must
be carried out for the satellite receiver and a search started for
the channels.
In this connection, please refer also to the device manufacturer's
operating manual.
Before positioning the antenna, check to ensure that there
are no obstacles close by (tress, houses, etc.) so that it will
receive satellite signals without any problems.
Never use the satellite antenna if there are strong winds
(80 km/hr.) as this may damage the product.
