10. Built-in devices
154
Use the adjusting knob / pushbutton to select the icon in the
menu line
m
.
• Press to switch to the setting mode.
Setting the timer
The timer can only be selected if the clock on the control panel has
been set.
If the timer has been activated (ON), the menu item Activate timer
OFF) is first displayed.
As soon as the heating has been switched on (room tempera
-
ture and hot water temperature have been activated) the fan
speed selected in the previous heating operation is displayed
in the status line. Manufacturer's default setting: “ECO”.
1)
Can lead to higher engine wear, depending on how often it
is selected.
2)
The “HIGH” fan speed has a higher current consumption,
higher noise level and higher engine wear.
d
BOOST
To heat room rapidly.
Available if the difference between
the selected and the actual room
temperature is more than 10°C.
e
NIGHT
Heating runs on a partial load
only;the set room temperature
may not be reached (depending on
the size of the vehicle and the
outside temperature).
Use the adjusting knob / pushbutton to select the icon in the
menu line
l
.
• Press to switch to the setting mode.
• Use the adjusting knob / pushbutton to select the desired fan speed
.
• Press the adjusting knob / pushbutton to confirm the temperature.
Selecting the fan speed
a
b
c
d
3
e
Icon Type of operation Description
-
OFF
Fan is switched off.
(Can only be used if no device is
being operated.)
a
VENT
1)
Air circulation, if no device is being
operated. RPM can be selected in
10 increments.
b
ECO
Automatic regulation of the fan
depends on the heating power,
optimised for the current heating
requirement.
c
HIGH
2)
High fan speed
