9. Gas 141
Diagram of MonoControl CS
Cylinder valve
Gas bottle
Hose rupture protection
High-pressure hose
Gas
filter
MonoControl CS/DuoControl CS
Reset button
Steel/copper pipe
Trigger element for crash sensor
Screw cap (test connection)
Tool to assist with screwing/unscrewing
Torx T20
Adjusting knob for bottle in use/reserve bottle
Status display for bottle in use/reserve bottle
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
2
3
4
5
6
7
8
10
Tool to assist with
screwing/unscrewing
Reset button in
“Ready” position
Reset button in
“Not ready” position
7
7
9
11
12
To reset, press firmly on the yellow reset
button , turn it lightly in a clockwise
direction and hold for 5 seconds until it
stays in the “Ready” position.
7
If the yellow reset button is not pressed
(“Not ready” position) then reset the crash
sensor.
7
If the resetting procedure is un
-
successful, use the Torx T20
located by the tool to assist
with screwing/unscrewing
to assist turning in a clockwise
direction.
12
11
To operate
• If necessary, open gas shutoff valves.
• Connect gas bottle(s) and ensure that the hose connection
is in perfect technical condition.
Open the valve on the bottle.
• Press
fi
rmly for approx. 5 seconds on the hose rupture
protection on the high-pressure hose.
1
2
3
