7.
Electrical Installations
106
7.4
Electric power supply
In all of the vehicles, the central electrical system is installed
underneath the front right passenger seat.
Electricity for the van can be obtained from the following
connections:
- 230V mains connection 50 Hz
- via the generator when the motor is running
- via the ancillary battery
Everything that uses 12 V, such as lighting, water supply, etc.,
is available.
CEE-External socket
Supply via mains connection
The van is connected to the external 230 V mains by means of
the CEE external socket
j
located in the side wall.
To connect the CEE feeder plug
• Switch off the automatic circuit breaker
o
(see also p. 107)
by pressing the rocker button
n
(see also p.107) down.
• Flip up the cover flap of the CEE external socket
k
(see Chapter
5.2 Cover Flaps)
.
• Completely unwind the connector cable.
• Open the cap of the CEE feeder plug
l
by pulling it up in a
90° angle.
• Insert the plug
m
until it locks into place.
• Switch the automatic circuit breaker
o
(see also p. 107) back o
n
.
Connected 230V feeder plug
4
1
2
3
