6. Interior structure
52
6.3 Tables
Handle for metal elevating table
Metal elevating table base
To lower
• Pull upwards on the handle
j
on the right-hand side.
• Use one hand to lightly press the table down and swing it down
towards the middle of the caravan. The table only locks into
place in this lowered position when the handle snaps back into
its original position.
To turn
• There are rollers on the table legs, shifted 45°, which enable the
table to be turned around its centre point in any desired direction.
Metal elevating table base
Single-post lifting
Single-post elevating table leg
To lower
• Pull the tabletop slightly upwards. This activates the lowering
function.
• Hold the tabletop steady while it is being lowered.
1
• To unlock, pull the locking pin
k
up and then pull the bracket
into the desired position.
• To lock, push the bracket back to its original position until it
locks into place.
Articulated TV Bracket
When driving, the TV bracket must always be locked in
its original position.
TV bracket, extended
2
• To unlock, press the metal rail
j
and, at the same time, extend
the TV mount.
• To retract the mount, push it back to its original position until it is
noticeably locked into place.
Sliding TV Bracket
(for Model 620 CL only)
Sliding TV bracket, extended
1
Neither the metal elevating table leg nor the single-post
elevating table leg are fastened to the floor. Before dri
-
ving, lower the table and, depending on the model, secure
it with one or two pushbuttons either to the seat base or
to the front/rear wall.
Securing the table
