12. Maintenance and upkeep
154
12.4 Changing bulbs in the rear lights
Changing the licence plate illumination
• To change the registration plate light,
fi
rst unscrew these screws
j
.
• Remove the two wires
k
and attach them to the new light
(They can re connected to any terminal).
• When putting in the new light, take care to ensure that the closed
side
l
of the light points towards the plastic on the rear bumper
m
. Otherwise there is a danger that the plastic on the rear bumper
will melt when heat is generated.
•
Fi
rmly tighten the screws
j
to fasten the light securely.
1
2
3
4
Registration plate light
Removing the cable
Lamp
Disconnect the power supply before changing the
lamps!
Lamps can be hot!
Ensure that no liquids (e.g. rainwater) flow into the cover.
