10. Built-in devices
131
It is not possible to set any temperature if the daytime or
nighttime automatic system is in operation. The plus and
minus icons are then greyed out.
Hot water
The boiler can also be used even if it has not been filled with fresh
water.
1. No hot water.
If you do not need hot water, press
"-".
(
The icon
is empty)
.
3. More hot water.
Should you need more hot water, you can tem-
porarily increase the water temperature to approx. 65 °C. Press
the plus key "+".
(
The icon
is full.
After 30 minutes, the hot-water heater will switch back to normal
operation. If you have selected more hot water, the circulation
pump will continue to operate.
2. Normal operation.
If there is fresh water in the tank and you
would like to have hot water, press "+".
(
The icon
is half full.
)
It is not possible to make any settings for hot water if
the daytime or nighttime automatic system is in opera-
tion and you have switched off the hot water. The plus
and minus icons are then greyed out.
If the "Operation" function for the pump has been set
to "Cont", you cannot select this.
If the "Operation" function for the pump has been set
to "Cont", the function "Permanent pump operation"
will be disabled for 30 minutes, but then returns to per-
manent pump operation.
You do not need to make any settings if you only require
hot water, for example in summer when no further he-
ating is required. The heating system will control this
function automatically.
Heating with electricity
Use the following procedure to activate the "Heating with electricity"
function. The higher the selected output, the faster the caravan will
heat up.
If electricity and gas are selected together, you can set whether gas
or electricity is to take priority
(see Tools menu)
. The boiler uses no
higher output than is required, even if 3 kW has been selected.
