12. Maintenance and upkeep
156
Maintenance
The smoke detector system does not require any maintenance. From
time to time, remove the dust from the cover of the detector and en
-
sure that the air slots are not dirty or blocked up by insects or similar
objects. If necessary, the detector should be wiped off with a dry cloth
and then hoovered on the outside approx. twice a year.
Please observe the operating instructions of the device
manufacturer.
Test button
Holes for the lock
Block battery, type 9VDC 6F22
Pins for battery contact
Locking pegs
1
2
3
4
5
Changing the battery
To ensure that the block battery continues to function correctly it
must be changed regularly, but no later than when the warning signal
beeps.
• Carefully turn the cover of the smoke detector anti-clockwise until
it can be removed from its mount.
• Take out the used block battery and unpin it from the pins.
• Connect the new block battery to the pins, ensuring that the pins
click into place on the poles of the block battery.
• Place the battery in the smoke detector's battery container.
• Place the cover of the smoke detector so that the holes for the lock
are over the locking pegs. Carefully turn the cover clockwise until
it locks into the mount.
12.5 Changing the battery and maintenance of the smoke detector
Test
• Press the test button for at least 4 seconds until the alarm goes off.
The alarm goes off when the electronic system is working. It will
stop as soon as you let go of the test button.
Test the smoke detector every time the battery has been
changed.
Batteries should never be thrown in the container for
normal household waste. Always return used batteries
to a shop that sells batteries or take them to a designa
-
ted collection point.
Smoke detector closed
1
Smoke detector opened
5
4
3
2
